Batch mixer MS – nozzle discharge at a low price!
MS mixers from m-tec have a mixing system that has been proven many times in practice. They work according to the centrifugal mixing principle: in this case a special mixer construction causes a three-dimensional particle movement in the components to be mixed, guaranteeing excellent mixing quality with short mixing times.
Mixing tools and mixer drive performance, size and material are tailored to the specific material to be mixed. Special centrifugal blades - in wear-resistant materials if necessary - ensure an intensive, yet gentle mixing process. This makes it possible to avoid most damage to granulated material and to prevent material from being crushed between the mixing tool and the mixer housing.
more...
In addition, the use of agitators (fitted with special mixer tools) means that additional mixing energy can be applied to the material to be mixed. Furthermore this means that agglomerates, pigments and fibres can be processed without difficulty.
MS mixers are ideal for cost-conscious customers who rarely change the formulation, or who are happy to accept a certain amount of manual cleaning. The mixing result is exactly the same as that achieved with the top model, the MR!
In MS mixers, the mixed product leaves the mixing chamber by means of pneumatically activated discharge flaps, which are surrounded by discharge nozzles. This process enables the mixer to be discharged quickly and easily anytime. The sealing system with mechanical self-cleaning guarantees a 100% seal, even with cohesive mixing products.
MS type mixers are characterized by the long service life of the mixer shaft seal, thanks to a specially developed sealing lip system. Naturally, conventional compression gland or air gap seals can be provided.
Highlights
- Low investment costs (compared to mixer type MR)
- Practically residue-free discharge, thanks to a special rectangular flap (optional)
- Excellent mixing results (as with the MR mixer)
- Simple system planning through the use of several outlet nozzles for the various target addresses
- Quasi-continuous production through the use of an underhopper (as with the MR mixer)
more...
- Gentle mixing using special mixing blade geometry
- Short discharge times, facilitated through the geometry and layout of the mixing tools
- Smaller overall height than the MR or ME mixer
print