print 
Continuous mixer type MD: For continuous performance!
MD continuous mixers from m-tec have a tried-and-tested mixing system and offer the best conditions for a wide variety of tasks. They work according to the centrifugal mixing principle: in this case a special mixer construction causes a three-dimensional particle movement in the components to be mixed, guaranteeing excellent mixing quality at short mixing times.
In addition the MD mixer stands for high level flexibility: Centrifugal mixing in the mechanical agitator bed, mixing tools and mixer drive performance, as well as size and material, are precisely adjusted to the specific material to be mixed. Special centrifugal blades (in wear-resistant materials if necessary) ensure an intensive, yet gentle mixing process. This makes it possible to avoid most damage to granulated material and to prevent material from being crushed between the mixing tool and the mixer housing.
In addition, the use of agitators fitted with special mixer tools means that mixing energy can be applied to the material to be mixed. This means that agglomerates, pigments and fibres can be processed without difficulty.
The mixer arms are attached to the mixing shaft by means of push-on connections with adjusting screws, enabling the angles and spacing of the mixing tools to be adjusted quickly and tools to be replaced at speed.
In the case of the MD mixer, the mixed material passes though the whole length of the mixer and leaves it by means of the overflow mechanism at the outlet which is operated either manually or by means of a motor. This means that the filling level and residence time can be easily adjusted while mixing is in progress.
In addition, the use of agitators fitted with special mixer tools means that mixing energy can be applied to the material to be mixed. This means that agglomerates, pigments and fibres can be processed without difficulty.
The mixer arms are attached to the mixing shaft by means of push-on connections with adjusting screws, enabling the angles and spacing of the mixing tools to be adjusted quickly and tools to be replaced at speed.
In the case of the MD mixer, the mixed material passes though the whole length of the mixer and leaves it by means of the overflow mechanism at the outlet which is operated either manually or by means of a motor. This means that the filling level and residence time can be easily adjusted while mixing is in progress.
Continuous mixer MD - added benefits
Optimum results thanks to the continuous mixing process- Mixing mechanism with centrifugal blades
- Froude’s number 3
- little wear
Variable filling level thanks to overflow mechanism
Easy maintenance
Small installation height
- Variable residence time
- Overflow mechanism discharge
- Can be adjusted during operation either manually or by means of a motor
Easy maintenance
- Large service hatches
Small installation height
- Easy installation in existing systems guaranteed