Contact

What all P50-variations have in common is the siteadapted design of the machinery with the „easy to clean“ stainless steel hopper. Thereby you can choose a small (90 l) or a big (120 l) hopper, which is also available with an additional mixing unit. With this mixing unit, the P50 is suitable for hardly mixable products as for example self-levelling-products.

The drive is available with 5,5 kW, 7,5 kW or 9,2 kW power. If requested, the drive speed can be controlled by a frequency converter. Thus, the pumping capacity can easily be adapted to the requirements.

The control box is designed as a stand-alone unit, in order to enable a quick cleaning of the P50 with a high pressure cleaner. Besides, the control box convinces by the clearly arranged control elements.

Of course, the P50 is equipped with connections for the operation with a compressor and for the fully automatic feeding by a mixing unit. The big wheels enable smooth transport on site.

Easy Pump
The use of a frequency converter (optional) enables the pump
motor to be started at full power and permits a continuously adjustable output.

• Lime plasters
• Lime cement plasters
• Bricklaying mortar
• Finishing plasters
• Reinforcing mortar and adhesive mortar
• Thin layer filling compounds
• Self-levelling-products
  

• Conveying pressure:* up to 30 bar
  
• Drive motor: 5.5 - 9.2 kW, 400V, 50 Hz
• Electrical connection: 400 V, 50 Hz, 3 ph
• Fuse: 25 A / 35 A
• Connecting cable: 5 x 4.0 mm²
• Connector: 32A 5p 6h
• Water supply: 3/4“ water hose with GEKA coupling, required water pressure/min. 2.5 bar while the machine is running
  
• Dimensions: approx. 2120 x 590 x 620 mm for machine with big hopper and 9.2 kW drive
• Weight: approx. 110 - 170 kg

* Depending on consistency, quality and composition of the material, pump model and condition, diameter and length of the delivery hose and also the pumping height of the material.